Products

Versalift

  • Wide range of quick attach implements
  • Numerous job applications
  • Excellent manoevrability
Simple, strong and reliable
Our Range of Versalifts:
Prod_ADT_B50D

220A Versalift

  • Summary
  • Technical Data
  • Downloads

 

Key Features:
  • Engine net power: 46 kW
  • Operating weight: 4 620 kg
  • Lifting capacity: 2 750 kg

Attachment

 

Type: 1 cu m GP bucket, 1.2m Class II fork tynes
Capacity: 1 m³
Operating Mass

 


Unladen Front: 3,834 kg
Unladen Rear: 2,046 kg
Unladen Total: 5,880 kg
Shortest Wheelbase: 2,568 kg
Load distance ahead of front axle: 1,839 m
Outstretched Tipping load: 2,857 kg
SWL - Payload: 2,000 kg
SWL Laden Front: 7,266 kg
SWL Laden Rear: 614 kg
SWL Laden Total: 7,880 kg
Implement Hyd System

 

Type: Fixed displacement open centre seperate gear pumps with full flow suction filtering. WO return filtration or cooling
Suction Filtration: 20 micron
Hydraulic Tank

 

Type: Integral with tubular frame
Oil Type: Rando HDZ 68 Hydraulic fluid
Capacity: 140 l (150 l for system)
Maximum operating temp: 90 deg C @ 45 ambient
Transmission Charge Circuit

 

Model: Bosch Double
Type: Aluminium gear pump
Pump displacement: 16 cc/rev
Pump Flow @ Governed engine: 34.4 l/min @ rpm
Relief Pressure setting: 17 bar
Pressure Filter Rating- Beta 75 rating: 13 micron
Tail wheel

 

Tail Wheel Tyre Type: High Flotation Implement, 10 Ply with inner tube
Tail Wheel Tyre Size: 400 x 15.5
Tail Wheel rim: 13 x 15.5, 1 piece
Tail Wheel Inflation Pressure: 2.0 bar
Unladen Ground Pressure Rear: 1.15 bar
Drive Motors

 

Model: Eaton 74315
Type: Axial piston, closed loop
Fuel Inlet System

 

Water separator primary filter- spin-on: Frame mounted, 5 microns
Secondary filter- spin-on: Engine mounted, 5 microns
Pre Cleaner System

 

Type: Cyclonic dust bowl
Drive Pumps

 

Model: Eaton 78363
Type: Axial piston, closed loop, manual control swash plate
Control: Direct control, foot lonkage
Pump Displacement: 40.6 cc/rev per wheel
Relief pressure: 276 bar
Flow rate at governed RPM: 87.29 l/min per wheel
Engine

 

Model: Deutz F4L912
Configuration: 4 cylinder, in-line, air cooled with integrated blower fan
Governed Power: 46 kW
Max. torque: 234 Nm @ 1 500 rpm
Governed full Power Engine Speed: 2 150 rpm
Max. Rated Speed: 2 500 rpm
Aspiration: Naturally aspirated
Frame Mounting: 3 point rigid mounting
Sump material: Cast Aluminium
Oil Capacity: 9 l
Blower failure warning: Mechanical linkage induces injector pump shut-off
Low idle: 800 rpm
High idle: 2 250 rpm
Fuel filtration: Two stage. Spin-on water separator primary, replaceable spin-on secondary
Oil filtration: Replaceable spin-on paper-type micro filter- full flow
Engine/Trans. Coupling

 

Type: Bell nylon gear coupling
Air Cleaner

 

Type: Dual (primary & safety) paper element cyclonic canister type with restriction visual indicator
Drive Wheels

 

Drive Tyre Type: Earthmover 12 ply - L3, tubeless
Drive Tyre size: 17.5 x 25
Drive Wheel rim: 14 x 25, 1 piece
Drive Wheels Tractive Effort: 29.019 kN-machine
Road speed: 9.5 Km/Hr at governed engine speed
Drive Wheel Inflation Pressure: 1.5 bar
Unladen Ground Pressure Rear: 0.60 bar
Brakes

 

Service Brake Type: Closed Loop Hydrostatic Wheel retardation
Park Brake Type: Spring applied , hydraulic release wet multi disc
Exhaust

 

Type: Rigid frame mounted stainless steel vertical silencerwith short stack pipe outlet
Boom/Mast Hydraulic Function

 

Pump Model: Eaton #26
Pump Type: Gear, open centre, Trans.pump thru-drive
Pump Displacement: 29 cc/rev
Safety/Ergonomics

Over-centre lock-down latches x2 to prevent accidental seat plate tip-up; Low profile padded seat with lap strap seat belt

Electrical System

 

Voltage: 12 V
Lighting: Frame mounted forward and rear
Lockable Isolator Switch: Battery mounted fuse, 300 Amp., fall system protection via resetble circuit breakers
Warning Lights

Oil pressure sensor alternator charge light

Standard Choices

Fork frame, 1.8m Class 2; Fork Frame 1,2 Class 2; Bucket, 1m³ 2.2m wide

Non-Boom Aux Hyd Functions

 

Pump Type: Gear, open centre, engine geartrain drive
Pump displacement: 22.5 cc/rev
Pump Flow @ Governed engine: 48.4 l/min @ rpm
Cabin

 

Type: Integral with steel frame, no doors
Guarding: Rear engine bay doors
Fuel Tank

 

Type: Remote to frame, rear mounted
Capacity (L): 76 l
Steering System

 

Type: Front wheel hydraulic skid steer via foot operated treadle control system
Options (drawings)

Line Drawings

220A Versalift PDF Brochure
English (745.82 Kb)
220A Versalift Spec Sheet
French (398.58 Kb)